|
Descriere produs: Descarca aici oferta de prezentare a Generatorului electrocauter DRE VETERINARY DRE ASG-200 in format pdf. • 200 watts maximum power output
• Monopolar and bipolar capable
• 10 blend settings
• Coagulation and fulguration modes
• Pinpoint and spray coagulation
• Split or solid return electrodes
• Delivers consistent, repeatable power
into varying load impedances.
• Defibrillator-proof type CF equipment
• Footswitch indication on face of unit
• Dual voltage 50/60 Hz
• Does not require calibration
• Two-year manufacturer’s warranty
General
• Classification Class 1 Equipment,
IEC 60601-1
• Type BF (Defibrillator Proof )
• Spillage Protection Drip Proof (IEC 60601-2-2)
• Output Configuration Isolated (RF Floating)
• Cooling Natural Convection, No Fan
Dimensions and Weight
• Width 31.1 cm (12.3”)
• Height 15.3 cm (6.0”)
• Depth 41.3 cm (16.3”)
• Weight < 8.8 kg (< 19 lbs.)
Output Power
• Cut 200 W @ 300 Ω
• Blend 200 W @ 300 Ω
• Pinpoint 120 W @ 500 Ω
• Spray 80 W @ 500 Ω
• Bipolar 80 W @ 150 Ω
• Duty Cycle 10 S / 30 S
• Output Frequency 490 kHz ± 5
• Input Current 4.5 A ~
• Line Voltage 100 - 240 V ~
• Line Frequency 50-60 Hz The DRE ASG-200 is a multipurpose electrosurgical generator
for use in the modern operating room and surgi-center. It features
both monopolar and bipolar functions to satisfy all of your surgical
demands with safety, flexibility, reliability, and convenience.
Ten Blend Settings
You don’t have to settle for one or two blend modes anymore.
With the ASG-200 you have ten different blend settings plus cut,
all with 200 watts maximum power output for the most
demanding procedures.
Two Modes of Monopolar Coagulation
Coagulation (120 watts maximum power) and Fulguration (80
watts maximum power), plus Bipolar (80 watts maximum power).
Digital Power Control
In addition, the ASG-200 delivers consistent, repeatable power
into varying load impedances, with BovieFDFS™ (Fast Digital
Feedback System), thereby greatly reducing the need for
changing the power setting to obtain the desired surgical effect. Why 200 Watts instead of 300?
Nearly every hospital specification on an electrosurgical
generator calls for 300 watts of power but in reality 300 watts is
needed very infrequently. The fact is, many surgeons rarely use
over 120 watts of power and it often results in spending a few
thousand dollars more per unit for a feature that just is not used.
The DRE ASG-200 is designed to deliver the absolute highest level
of safety and quality, but not waste money on features you rarely
use. One major area of savings can be found in the output power
of 200 watts.
Ten Cutting Blend Modes
You don’t have to settle for one or two blend modes anymore.
With digital technology, you can choose from ten different blend
settings. These are clearly indicated by the LED blend indicator
bar conveniently located adjacent to the blend button controls.
When no LED is lit the DRE ASG-200 delivers pure cutting power.
As the “up” button is pushed the bar begins to illuminate. As the
illumination advances from the bottom to the top the degree of
hemo-stasis will increase and cutting speed may decrease. The
ASG-200 remembers its last settings; so when you turn the unit on,
it performs a safety system check and automatically powers up to
the last activated settings. For your convenience, the power output
of the ASG-200 is calibrated in watts with large, illuminated
digital displays.
Coagulation Modes…
The DRE ASG-200 offers two modes of coagulation: Coagulation and
Fulguration. Coagulation (pinpoint) provides precise control of bleeding
in localized areas. Fulguration (spray) provides greater control of bleeding
in highly vascular tissues over broad surface areas.
Designed for Safety
Electrosurgical safety is a combination of good equipment design and
safe surgical practices. The ASG-200, as part of this combination, represents
state-of-the-art design using the latest digital components. The ASG-200
also self-test circuits, audible tones, discreet outputs, and isolated
output circuitry.
BovieNEM™ means safety is digitally designed inside. The FCFS™ (first
come first served) discrete output design of the ASG-200 enhances safety
by allowing only one output to be activated at any given time. This feature
assures that only the device you first activate will be an active device.
Secondary commands will not override the first command. As an example:
while the monopolar foot controlled output is activated, all handswitching
is inactive, as well as the bipolar footswitch capability. For additional safety
this unit has totally separate bipolar controls, discrete output, dispersive
electrode fault alarms in both sensing and non-sensing modes, and is
designed with an isolated RF output.
Digital Error Detection
Digital error detection means unsurpassed safety for the
surgeon, O.R. staff, and patient. The ASG-200 constantly monitors
every aspect of it’s output. At the sign of any problem the
machine instantly disables the output and displays the
appropriate error code on the display.
Built to the Required Standards
The ASG-200 has passed the following safety standards:
CSA C22.2 NO 601.1-M90, UL 2601-1-UL, IEC 60601-2-2,
CENELEC EN 60601-1-2, FCC PART 15 Class A.
|
mareste imaginea
